Suitable for 500-3000TON IMM
Based on European design
1)  Special Z-axis beam design is able to carry additional 30% of weight load and better tension compared to other conventional structural designs.
2)  The arm are gripping on both side of main beam, it provide stable moving on the main beam, suitable for removing the automobile part, household pallet…etc from injection molding machine
Optional features for flexible control. 360°B Axis,
180°C Axis and 360°A Axis
Main specification

MODEL	ECW-25-1600	ECW-25-1800	ECW-25-2100
Arm type	Telescopic type
Suitable I.M.M.range (TON)	530-850	850-1600	1250-2100
Vertical stroke (mm)	P: 1500	P: 1800	P: 2100
Crosswise stroke (mm)	P: 1000	P: 1000	P: 1000
Travel stroke(mm)	2500/3000
Gripper fold angle( °)	90
Max load (with gripper)(Kg)	25
Minimum take time ( sec. )	3	3	3
Dry cycle time (without gripper)( sec. )	11	12	13
Drive system	X,Y,Z - Servo motor
Working Air pressure (Kgf/cm²)	5-7
Air Cinsumption (Nl/cycle)	24	24	24
Power Consumption (KVA)	7.6	7.6	7.6
Power supply	AC220±10% (50/60HZ)
Net weight (Kg)	760	850	950

MODEL	A	B	C	D	E	G	H	J	K	L
ECW-25-1600P	2230	550	3600	130	1600	2500 3000	2150	445	1445	450
ECW-25-1800P	2330	550	3600	130	1800		2150	445		450
ECW-25-2100P	2480	550	3600	130	2100		2150	445		450