Suitable for 500-3000TON IMM
Based on European design
1)  Special Z-axis beam design is able to carry additional 30% of weight load and better tension compared to other conventional structural designs.
2)  The arm are gripping on both side of main beam, it provide stable moving on the main beam, suitable for removing the automobile part, household pallet…etc from injection molding machine
Optional features for flexible control. 360°B Axis,
180°C Axis and 360°A Axis
Main specification

MODEL	SVC-1500P	SVC-1800P	SVC-2100P	SVC-2500P	SVC-3000P
Arm type	Telescopic type
Suitable I.M.M.range (TON)	500-650	650-1600	1600-2400	2400-2800	2400-3600
Vertical stroke (mm)	P: 1500	P: 1800	P: 2100	P: 2500	P: 3000
Crosswise stroke (mm)	P: 850	P: 1000	P: 1150	P: 1200	P: 1400
Travel stroke(mm)	2200	2400	2600	3000	3000
Gripper fold angle( °)	90
Max load (with gripper)(Kg)	25	25	25	50	50
Minimum take time ( sec. )	3	3	4	5	5
Dry cycle time (without gripper)( sec. )	11	12	13	16	16
Drive system	X,Y,Z - Servo motor
Working Air pressure (Kgf/cm²)	5-7
Air Cinsumption (Nl/cycle)	24	24	24	40	40
Power Consumption (KVA)	7.6	7.6	7.6	12.6	12.6
Power supply	AC220±10% (50/60HZ)
Net weight (Kg)	750	850	950	1250	1350